Stormworks: Build and Rescue
Introduction
If you have created a Stormwork's server, you will notice that you cannot set anything in the startup. Since you have to do it yourself with this server, we will show you what to do in this guide.
Start & Stop
In order to set up the server, you need some files, which the server has to download first! Turn on the server once, and when it is up, turn it off again (or after ~50 seconds). Now the server has downloaded everything and can be set up |
---|
server_config.xml
Path: /home/container/server_config.xml

Port
To change the port, you need to find out the primary port of your server.
Steps:
go to the "Network" tab
copy the port of the primary network
Paste the port into the "server_config.xml" -> Port

Last modified: 20 February 2025